HARDWARE FEATURES |
|
Ergonomic design | An easy-to-use interface that provides a traditional telephony-like user experience. |
Graphical display | White backlit, grayscale, 3.5-in. (9-cm) 396 x 162-pixel display |
Handset | ● Supports either a narrowband or a wideband audio handset connected through an RJ-9 port. ● All 6800 series handsets are Hearing-Aid-Compatible (HAC) and meet Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA). You can meet Section 508 loudness requirements by using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad on all 6800 series models is also ADA-compliant. ● The 6800 series handsets produce a magnetic field that attracts small metallic objects such as pins and staples. To avoid possible injuries, do not keep small metallic objects close to the handset. |
Headset | ● The 6800 series provides exceptional noise isolation when used with a Cisco Headset. ● The analog headset jack is a wideband-capable RJ-9 audio port |
Backlit indicator | Backlit indicators on the audio path keys (handset, headset, and speakerphone), mute key, select key, line keys and message waiting. |
Volume control | A volume-control toggle provides easy decibel-level adjustments of the handset, monitor speaker, and ringer. |
Full-duplex speakerphone | A full-duplex speakerphone gives you flexibility in placing and receiving calls. For added security, the Audible Dual-Tone Multi-frequency (DTMF) tones are masked when the speakerphone mode is used. |
Single-position foot stand | The foot stand holds the phone in a single position, making the display easy to view and the buttons easy to use while sitting down. You can remove the foot stand for wall mounting. There are mounting holes located on the back of the phone. |
Wall-mountable | Can be wall-mounted using the optional 6800 Series wall-mount kit (sold separately). |
Electronic hook switch | Electronic hookswitch headset support via its auxiliary port. |
Keys | ● Lines ● Softkeys ● Two-way navigation and select ● Service ● Standard keypads ● Volume control toggle ● Speakerphone, headset, and mute Other than the primary line assignment on the first line key, the other keys may be configured as user-customizable, or system administrator-customizable Programmable Line Keys (PLKs) Additionally, the 6841 has: ● Hold/resume, transfer, and conference ● Messaging, Directory |
Ethernet cables | Category 3, 5, 5e, and 6 for 10-Mbps cables with 4 pairs Category 5, 5e, and 6 for 100-Mbps cables with 4 pairs Category 3, 5, 5e, and 6 for 1000-Mbps cables with 4 pairs |
POWER FEATURES |
|
IEEE PoE | The 6851 support IEEE 802.3af PoE (Class 2); power consumption does not exceed 6.49W. |
Power adapter with country clips | 6800 Series regional power adapters are available for powering the 6851 when used in non-PoE deployments. |
Cisco power injector | The 6851 is compatible with the Cisco Unified IP Phone Power Injector (CP-PWR-INJ), and with the Cisco Aironet ® Power Injector (AIR-PWRINJ5=). |
